# Network configuration

***Copyright © Quectel Wireless Solutions Co., Ltd. 2026. All rights reserved.***

---

This chapter introduces the network interfaces and configuration methods for the **Quectel Pi H1** single-board computer.

# Network interface

**Quectel Pi H1** single-board computer supports Ethernet **RJ45** interface, **USB** network interface, and built-in wireless network card.

```{image} images/image_UE8nbiTAmosrF8xHl7kcXaJhnLb.webp
:width: 910px
:height: 507px
```

# Ethernet

## Preparations

To establish a wired network connection, insert the network cable into the RJ45 port.

```{image} images/image_Ss9rbBEqjowLqpxmcllcgKXwnOb.webp
:width: 1707px
:height: 1280px
```

## Software configuration

After successful connection, a network connection icon will appear in the status bar at the upper right corner of the desktop, and the system will automatically assign an **IP** address.

```{image} images/image_PpDLb8ZvroJLPSxUaJecPIlXnrd.webp
:width: 1402px
:height: 788px
```

## Search for network information

1. Click the arrow next to "**Wired**" in the status bar.

```{image} images/image_S9R5bcm9uoh1dMxYwNxc0Gjqncc.webp
:width: 1406px
:height: 786px
```

2. Click "**Wired settings**".

```{image} images/image_XiJzbkH4Ho2uTVxPU4Wc9DyDnhb.webp
:width: 1408px
:height: 784px
```

3. Click the option button next to the connected network to view relevant network connection information.

```{image} images/image_R0iHbvXoxorJrNxsj9ec6habnah.webp
:width: 995px
:height: 652px
```

```{image} images/image_QpQ6bV9MUoePXhxwFqgcuz2UnIc.webp
:width: 995px
:height: 652px
```

# Wireless network

## Preparations

Prepare a Wi-Fi hotspot that can connect to the Internet.

## Software configuration

1. Click the status bar in the upper right corner of the **GNOME** desktop, then click the arrow next to "**Wi-Fi**".

```{image} images/image_Azhmbxye3ob5EexaG5PcgnlAnLd.webp
:width: 1403px
:height: 788px
```

2. Click "**All networks**".

```{image} images/image_B1qMbmMawoLqSpxIFkccVCsYnnb.webp
:width: 1401px
:height: 785px
```

3. Click the wireless network you want to connect to.

```{image} images/image_JM2bbpt6BoDvM0xsHlTcywLonAb.webp
:width: 991px
:height: 651px
```

4. Enter the password and click "**Connect**".

```{image} images/image_RzY8bFhXuoa95WxHMs3cuH33nPc.webp
:width: 991px
:height: 651px
```

5. After successful connection, the corresponding wireless network status will be displayed as **Connected**, and the **Wi-Fi** connection icon will appear in the status bar at the upper right corner.

```{image} images/image_DG4QbQuRtodBfLxih1WcSQy2nyh.webp
:width: 1407px
:height: 785px
```

## Search for network information

Click the option button next to the connected wireless network to view relevant network information.

```{image} images/image_QYo7bVnd4oWVwWxaTnMcIyDhnrb.webp
:width: 995px
:height: 652px
```

```{image} images/image_EEHdbHESdoGgsYxciEeclpdzn9b.webp
:width: 995px
:height: 652px
```

# USB network

A **USB** Ethernet adapter is required for **USB** network connection. After the adapter is connected, insert the Ethernet cable into the **RJ45** interface of the adapter, and the subsequent configuration steps are the same as those described in the Ethernet configuration above.

```{image} images/image_K9JcbdCLuo7oV6xnaY3cWm7vnGe.webp
:width: 900px
:height: 504px
```